Strengthen U.S. Manufacturing and Lower Your Costs! Re-Shore!

by admin on January 14, 2012

By Harry Moser

The decline of U.S. manufacturing over the past several decades is a major cause of our high unemployment rate, massive trade deficit and huge budget deficit. Domestic suppliers have watched as large manufacturers off-shored work and jobs. But today, the dynamic is changing. Two U.S. trade associations, the National Tooling and Machining Association (NTMA) and the Precision Metalforming Association (PMA), are taking direct action to reverse the decline of manufacturing via the Re-Shoring Initiative.

The Re-Shoring (synonym for “back-shoring” and “onshoring”) Initiative promotes returning work to the U.S. by assisting companies to more accurately assess their total cost of offshoring through the Total Cost of Ownership (TCO) calculator.

Many companies that chose to off-shore simply compared FOB prices. The supply chain managers are often rewarded for savings at the FOB price level, ignoring a broad range of other costs and risks that disappear into lost sales, overhead or the balance sheet. The often ignored offshoring costs include:

  • Rising wage rates, currencies and reject rates in developing countries
  • Duty and freight
  • Pipeline and surge inventory impacts on balance sheets and JIT operations
  • Intellectual property and regulatory compliance risk
  • Higher transportation and fuel costs
  • Higher prototyping costs (U.S. shops charge more for prototypes because they will not get the production
  • Higher end-of–life obsolete inventory costs because of higher inventories when the design is changed or the product life ends
  • Less effective innovation because manufacturing operations are distant from R&D and marketing (loss of clustering effectiveness)
  • Travel and personnel cost
  • Carbon footprint

Companies that calculate their TCO will discover that they could re-shore substantial amounts of work and save money. The Re-Shoring Initiative’s TCO Estimator software allows Original Equipment Managers (OEMs) to calculate and compare the total costs associated with outsourcing and offshoring. The Estimator includes 18 user modifiable cost factors and makes it easy for an OEM to compare the full profitability impact of local versus offshore sourcing. The TCO is calculated for the present and then forecast based on user-projected wage inflation differentials and exchange rate changes. Job shops can use the Estimator to help their customers understand and calculate TCO.

For example, sourcing consultant Gibb River Group compared the U.S. and Chinese TCO of a low labor content, machined stainless steel gear. At FOB level, the U.S. cost was 15% higher than the Chinese cost. However, costs were the same for producing the steel gear in each country after adding duty, freight, quality and inventory cost. The U.S. cost was 8% lower after allowing for end-of-life and prototyping cost differences – a 23% swing just by calculating cost correctly! Calculation of IP risk, proximity to R&D and carbon footprint would have widened the U.S. advantage even more.

Lean and DFMA (Design for Manufacturability and Assembly) are other important tools for strengthening U.S. manufacturing by reducing wasted costs, including the higher labor cost which drives OEMs to offshore. Both processes are enhanced by local sourcing. Re-shoring reduces inventory, travel, quality and other non-value adding costs targeted by Lean and provides the proximity and common language and culture that make DFMA more effective.

Recently reported re-shorings had a range of causes similar to the offshoring costs listed above. These include:

  • Total cost, delivery and quality
  • Inventory build-up due to four month Chinese delivery
  • Total cost and the security of domestic supply
  • Capability not available in Mexico
  • Failure to honor warranty terms
  • Lack of a satisfactory Chinese solution (likely because the right alloys are not available).

The Re-Shoring Initiative’s objective is to change the mindset of U.S. supply chain managers from “offshored is cheaper” to “local reduces the Total Cost of Ownership.” We are providing the TCO cost accounting concept to help industry change its sourcing decision process. To achieve this major cultural change, our effort must be broad. We have created a surge of re-shoring publicity with numerous news stories as well as articles in newsletters and on websites. Our online Library contains 50 re-shoring examples so OEMs can see how competitors are benefiting from bringing work back to the U.S.

The Reshoring initiative has been featured in national print and television media. In addition to NTMA and PMA, we have received great support from the Association for Manufacturing Technology, the Society of Manufacturing Engineers and the American Machine Tools Distributors’ Association. Association for Manufacturing Excellence/ American Productivity & Quality Center (AME/APQC) and Fabricators and Manufacturers Association have recently hosted re-shoring webinars. The National Institute of Standards and Technology’s MEP (Manufacturing Extension Partnership) announced the AME/APQC webinar to the MEPs nationwide. Many local MEPs plan to use the Initiative to help their client companies be more competitive.

In addition, our Initiative helps these companies find the most competitive U.S. source through the NTMA/PMA Contract Manufacturing Purchasing Fairs: Emphasizing Re-shoring to Bring U.S. Manufacturing Jobs Home. The first re-shoring Fair was held in Irvine, California on May 12, 2010. The next Fair is planned for Mashantucket, Connecticut on October 29, 2010.

The NTMA has held 51 Purchasing Fairs in 25 years and NTMA and PMA have broadened the Fairs. The Fairs not only match OEMs and suppliers already sourcing domestically but also emphasize opportunities for Reshoring. The Fairs provide a venue for OEMs to conveniently find competitive domestic job shops for custom machined, stamped, fabricated and injection molded parts, special tooling (molds, dies and fixtures) and special machines.

The May 12 NTMA/PMA Fair in Irvine, California was a re-shoring success. Fifty-seven OEMs attended and 64% of them brought work to be re-shored. One hundred and thirteen shops attended to provide quotes for the OEMs’ work. Fifteen cases of recent re-shorings were identified.

The time is right for re-shoring to succeed. Companies that were ravaged by excess inventory in the recent recession can reduce their inventory via local sourcing. Skilled wages in low labor cost countries have been rising at about 10% per year vs. 2% in the U.S. Recent major labor strikes in China have resulted in wage increases of 24% to 100%. Transportation costs are rising again as oil prices increase and OEMs who have sourced work overseas continue to report problems with quality, counterfeiting and intellectual property violations.

According to a January 2010 Grant Thornton survey published in Supply Chain Solutions, 51% of companies that offshored found no financial advantage and 20% brought work closer to home in 2009.

Before the crash in 2008, the trade deficit peaked at about $700 billion/yr. Since manufacturing company sales average about $150,000/yr/job, about five million manufacturing jobs would be added if the trade deficit could be balanced by re-shoring. The accepted manufacturing multiplier of 1.4 means an additional 7 million other jobs would be created. Thus a total of 5 to 12 million more jobs would be added, reducing U.S. unemployment as low as 2%. The resulting increased income and corporate taxes and reduced unemployment and stimulus program expenses would cut the budget deficit by 30% or more. Of course, for some goods, other changes are needed, e.g. a much higher Chinese currency, more domestic energy production, etc.

The Obama Administration has called for doubling exports in 5 years and has threatened to tax companies that move jobs offshore. The Administration would strengthen the economy and employment more powerfully and faster by encouraging companies to embrace the Re-Shoring Initiative, showing the companies that it is in their own interest to keep the jobs here or bring them back. It is far easier for U.S. companies to be competitive on their home field than competing offshore.

You can help your company – and your country – via the Reshoring Initiative. Please visit the Initiative’s website where you can learn more about reshoring, read examples of success stories from our library and report your own reshoring successes. Managers and job shops can also register for the next Fair on the website. Additional information also can be found at

I ask you to support this effort, in the interest of your companies and of the quality of life of your children and grandchildren!

For more on the Re-Shoring Initiative and to obtain the free TCO Estimator, contact Harry Moser, leader of the Re-Shoring Initiative and Chairman Emeritus, Agie Charmilles LLC,

Harry Moser is Chairman Emeritus of GF AgieCharmilles, a producer of EDM and HSM (High Speed Milling) machines. Harry is a national leader in attracting more of America’s youth into manufacturing, in accelerating the trend to re-shore manufacturing jobs, in providing strategies for competing with low wage countries, and in the campaign for government policies that support manufacturing.

A “re-shoring” effort from the National Tooling and Machining Association (NTMA) and Precision Metalforming Association (PMA) is laying the groundwork to bring jobs back to the United States, and a main outlet for this initiative is the 2010 NTMA/PMA Contract Manufacturing Purchasing Fairs. The next reshoring Fair will be held on October 29, 2010 in Mashantucket, CT.


{ 1 comment… read it below or add one }

Manufacturer June 7, 2012 at 10:35 am

Readers interested in the state of manufacturing take part in this Manufacturing and Distribution survey and get a free copy of the report with data to help you plan and execute strategic objectives.


Cancel reply

Leave a Comment

Previous post:

Next post: